TECHNICAL SIMULATOR

Polyethylene Pipe & Fitting Simulator

Choose a product and size to draw its cross-section to scale: outside and inside diameter, wall thickness, SDR, pressure class, weight per metre and per coil or bar, and the water each metre holds. Overlay up to three configurations and add the one you need to your quotation request.

PE100 Water Pressure Pipe — OD 110 · PE100 · SDR 11 · PN16OD 110 mmID 90 mm*e 10 mm20 mmscale* calculated: ID = OD − 2e
Diameters to scale
Outside diameter110 mm
20630
Specification
  • * ID = OD − 2e
  • PN16 matches the catalogue SDR table.
  • Wall thickness and weight are calculated from the standard series and are approximate; final values are confirmed in the quotation.
Full product page
All specifications (17)
Outside diameter (OD)size table
110 mm
Inside diameter (ID)calculatedID = OD − 2e
90 mm
Wall thickness (e)size table
10 mm
SDRsize table
11
Nominal pressure (20 °C)size table
PN16 · 16 bar
Material gradesize table
PE100
Weight per metresize table
3 kg
Water per metrecalculatedπ/4 × ID² ÷ 1000
6.36 L
Bore areacalculatedπ/4 × ID²
6362 mm²
Bar of 6 mcalculatedkg/m × length
≈ 18 kg
Bar of 12 mcalculatedkg/m × length
≈ 36 kg
Coil of 50 mcalculatedkg/m × length
≈ 150 kg
Coil of 100 mcalculatedkg/m × length
≈ 300 kg
Coil of 200 mcalculatedkg/m × length
≈ 600 kg
Stripesize table
Blue
Wall structuresize table
Solid Wall
Reference standardcatalogue
ISO 4427 / EN 12201-2

P001-PE100-110-SDR11

0.87 m/smean velocity at ID 90 mm

v = Q ÷ (π/4 × ID²)

Where do these numbers come from?
  • Outside diameter, wall thickness, SDR, pressure class and weight per metre are the rows of each product page’s size table.
  • The inside diameter is worked out from the outside diameter and the wall: ID = OD − 2e.
  • The water one metre of pipe holds is the bore area (π/4 × ID²) divided by 1000, in litres.
  • The weight of a coil or bar is the weight per metre times the supplied length.
  • The mean flow velocity is the flow rate divided by the bore area.
  • The pressure class of each SDR for PE100 and PE80 comes from the catalogue’s SDR and pressure table.
Products you can open in the simulator

Pipes

Fittings

Valves

Irrigation Equipment

Tools, Measurement & Installation Supplies