Rotary & Guillotine Pipe Cutter
Rotary and guillotine pipe cutters for cutting large, thick-walled polyethylene pipe square before butt fusion or fitting; diameter range 63 to 400 mm.
- Cuts large, thick-walled PE pipe
- Rotary and guillotine types
- Diameter range 63 to 400 mm
- Square cuts to prepare for fusion
- Little swarf and no power saw
Key Specifications
- Product code
- P176
- Unit of sale
- Piece
- Dimensional options
- 1 rows in the specification table
What rotary and guillotine cutters are for
Large polyethylene pipe cannot be cut with shears. A rotary cutter turns around the pipe and its blade cuts through the wall gradually; a guillotine cutter cuts the pipe in one movement with a large blade and mechanical force. Both give a cut square to the pipe axis, which butt fusion and fitting installation need.
A clean, square cut means less work for the welding machine's planer and a lower chance of a poor weld. On water, sewer and repair projects the cutter is one of the main tools next to the welding machine.
Diameter range and buying tips
Our published row covers the 63 to 400 mm range. Each cutter model has a diameter range and a maximum wall thickness; give the largest diameter and thickest pipe of the project in your enquiry so a suitable model is offered.
Keep a spare blade in mind, because a blunt blade crushes the pipe and makes the cut crooked. While cutting, rest the pipe on a fixed support so it does not turn.
Safety and preparation before cutting
Before cutting, mark the cut line all round the pipe so the cut stays square. Rest the pipe on two fixed supports, one on each side of the cut, so it does not drop or jam the blade as the pieces separate.
On large pipe the cut-off piece can be heavy; wear gloves and safety shoes and keep your hands out of the blade path. After cutting, if the pipe is to be butt-fused, the welding machine's planer finishes the face.
Rotary & Guillotine Pipe Cutter — Technical Specifications
Wall thickness and weight are calculated from the standard series and are approximate; final values are confirmed in the quotation.
| Min Pipe OD (mm) | Max Pipe OD (mm) |
|---|---|
| 63 | 400 |
Rotary & Guillotine Pipe Cutter — FAQ
Up to what diameter does a rotary cutter work?
The published range is 63 to 400 mm, and each model has its own range.
What is the difference between rotary and guillotine?
A rotary cutter turns around the pipe and cuts gradually; a guillotine cuts in one stroke.
Is it suitable for small pipe?
For pipe below 63 mm, pipe shears are simpler.
Why does a square cut matter for fusion?
A square cut reduces planing and makes the weld more reliable.
