Drip Tape Connectors & Mini-Valves
Drip tape fittings: tape couplings for joining or repairing tape and tape-to-tape mini-valves for switching each row on and off; polypropylene body for 16 mm drip tape.
- Tape coupling for joining and repairing tape
- Tape-to-tape mini-valve to control each row
- For 16 mm drip tape
- Polypropylene body
- Fitted by hand, no tools
Key Specifications
- Product code
- P148
- Material & grade
- PP
- Outside diameter
- 16 mm
- Applications
- Irrigation & agriculture
- Dimensional options
- 2 rows in the specification table
What tape couplings and mini-valves are for
Drip tape may tear during the season, or two rolls may need joining. A tape coupling joins two tape ends and repairs the tape without replacing it. The tape is pulled over both ends of the coupling and held by its nut or clip.
A tape-to-tape mini-valve is a small valve between two lengths of drip tape that switches one row on or off on its own. It is useful when rows in a block need different amounts of water or when part of the field must be taken out of watering for a while.
Size and ordering
Both parts in our rows are for 16 mm drip tape, the same diameter as the slit and flat-emitter drip tapes on this site. In your enquiry give the part (coupling or valve) and the quantity.
To connect the start of the tape to the PE sub-main, use a start connector or off-take valve. Because many couplings and valves are used in each block, work out the quantity from the number of rows plus a few spares for repairs.
Fitting tips for tape fittings
Before connecting, cut the tape end square and make sure no soil or sand has got inside. Pull the tape fully over the coupling barb and tighten the nut by hand. Drip tape is thin, so do not overtighten the nut or the tape may tear.
At the end of the season when the tape is taken up, remove and keep the sound couplings and valves so they can be used again next season.
Drip Tape Connectors & Mini-Valves — Technical Specifications
Wall thickness and weight are calculated from the standard series and are approximate; final values are confirmed in the quotation.
| Outer Diameter (mm) | Type |
|---|---|
| 16 | Tape coupling |
| 16 | Tape mini-valve |
Drip Tape Connectors & Mini-Valves — FAQ
How do I repair torn tape?
Cut out the torn part and join the two ends with a tape coupling.
What does a tape mini-valve do?
It switches one row of drip tape on or off on its own.
Which tape size are they for?
16 mm drip tape.
How does the tape connect to the main?
With a start connector or off-take valve on the sub-main.
